<![CDATA[Zero Turn Mowers]]> http://www.robinsonoutdoors.net/zeroturn-mowers/commercial Thu, 11 Mar 2010 23:52:22 +0000 Zend_Feed http://blogs.law.harvard.edu/tech/rss <![CDATA[Wright Stander Rapid Height, 36" 17 HP Kawasaki (kai)]]> http://www.robinsonoutdoors.net/ws3617kawre.html - Rugged and durable with deck sizes of 32", 36", 42", 48", 52", and 61" - Driven from a standing position so you can shift your weight instantly to handle changing terrain - Mows faster than a traditional walk-behind mower with less user fatigue - The smaller sizeﾠallows you toﾠfit more mowers on a trailer - With no seat, seat belts, or arm rests, you can easily step off for a quick exit or to move debris - Outstanding control and handling for trim mowing Wright provides a 2-year Limited Warranty on mowers which covers parts and labor. See your local Wright dealer for further details.

Price:$7,269.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Wright Stander, 36" 17HP Stand On Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/ws3617kawre-1.html Wright Stander, 36" Cut Zero-Turn Lawn Mower - Rugged and durable with deck sizes of 32", 36", 42", 48", 52", and 61" - Driven from a standing position so you can shift your weight instantly to handle changing terrain - Mows faster than a traditional walk-behind mower with less user fatigue - The smaller sizeﾠallows you toﾠfit more mowers on a trailer - With no seat, seat belts, or arm rests, you can easily step off for a quick exit or to move debris - Outstanding control and handling for trim mowing Wright provides a 2-year Limited Warranty on mowers which covers parts and labor. See your local Wright dealer for further details.

Price:$6,719.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[RZT42 Zero Turn Lawn Mower 20HP Kohler, 42" Deck]]> http://www.robinsonoutdoors.net/cub-cadet-rzt42-42-cut-20-hp-kohler.html Cub Cadet RZT42 42" Cut 20HP Zero-Turn Lawn Mower Engine 20 HP Kohler® Courage™ OHV Cylinders 1 Engine Start Electric Engine Lubrication Full-pressure with spin-oil filter Engine Oil Capacity 1.6 qt. Transmission Dual Hydro-Gear™ EZT Steering 2-way adjustable lap bars Frame Fully welded stamped steel Front Axle Fabricated - pivoting, greasable Front Tire Bearings Polycarbonate NSB-90 Alternator 15 amp. regulated Battery Heavy-duty 12V sealed Safety Systems Operator presence PTO Clutch Electronic fingertip engagement Deck Lift Hand lever, multi-position Seat High back, lever adjustable Parking Brake Mechanical Hourmeter Standard electronic Forward Speed 5.5 mph Reverse Speed 3 mph Front Tires 11" x 4" - 5" Rear Tires 18" x 8.5" - 8" Turning Radius Zero Fuel Tank Capacity 3 gal. Wheelbase 43.5" Cup Holder w/Utility Bin Standard Overall Length 67" Width 45" Estimated Weight 480 lbs Cutting Width / Blades 42" twin blade, 3-in-1 Greasable Spindles N/A Cutting Height 1.5" - 4", 6-position height adjustment Deck Construction 13-gauge, floating Deck Drive System Belt driven, Kevlar® Anti-Scalping 2 adjustable gauge wheels, greasable Deck Wash Patented SmartJet™ high pressure deck washing system Accessories Optional mulch kit/optional bagger Warranty 3-year/120-hour limited

Price:$2,649.00 Special Price:$2,499.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[RZT50 Zero Turn Mower 22hp Kawasaki, 50" Deck ]]> http://www.robinsonoutdoors.net/cub-cadet-rzt50-22hp-kawasaki.html RZT50 Zero Turn Mower 22hp Kawasaki, 50" Deck Lawn Mower Engine 22 HP Kawasaki® V-Twin OHV Cylinders 2 Engine Start Electric Engine Lubrication Full-pressure with spin-oil filter Engine Oil Capacity 2 qt. Transmission Dual Hydro-Gear™ EZT Steering 2-way adjustable lap bars Frame Fully welded stamped steel Front Axle Fabricated - pivoting, greaseable Front Tire Bearings Polycarbonate NSB-90 Alternator 15 amp. regulated Battery Heavy-duty 12V sealed Safety Systems Operator presence PTO Clutch Electronic fingertip engagement Deck Lift Hand lever, multi-position Seat High back, lever adjustable Parking Brake Mechanical Hourmeter Standard electronic Forward Speed 6.0 mph Reverse Speed 3 mph Front Tires 13" x 5" - 6" Rear Tires 18" x 9.5" - 8" Turning Radius Zero Fuel Tank Capacity 3 gal. Wheelbase 43.5" Cup Holder w/Utility Bin Standard Overall Length 67" Width 54" Estimated Weight 527 lbs Cutting Width / Blades 50" triple blade, 3-in-1 Greasable Spindles N/A Cutting Height 1.5" - 4", 6-position height adjustment Deck Construction 12-gauge, floating Deck Drive System Belt driven, Kevlar® Anti-Scalping 4 adjustable gauge wheels, greasable Deck Wash Patented SmartJet™ high pressure deck washing system Accessories Optional mulch kit/optional bagger Warranty 3-year/120-hour limited See your local Independent Dealer for warranty details

Price:$3,249.00 Special Price:$2,999.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Cub Cadet Commercial - TANK S 7237 LP Zero Turn Mower]]> http://www.robinsonoutdoors.net/tank-s-7237-lp-zero-turn-mower.html Cub Cadet Commercial is expanding its ground-breaking Tank S series to give lawn care professionals more options for fuel efficiency with the Tank S D and Tank S LP. Like all Tank S units, the new Tank S D and Tank S LP boast patented Synchro Steer technology for intuitive zero-turn control with a steering wheel and dual foot pedal controls instead of lap bars while giving users the choice of diesel or liquid propane. Both options offer increased fuel economy, extended engine life and are built to handle even the toughest terrain. “The Tank S is packed full of innovative features but we wanted to take it one step further and expand the line to address more of the key issues facing our industry,” said Allen Baird, product manager, Cub Cadet Commercial. “Our new Tank S units are cleaner, more efficient and engineered for longer life. Combine that with best-in-class features like our Select Cut System cutting deck, allowing users to cut up to seven and a half acres per hour, and our complete line of Tank S products are the perfect solution for increased performance and designed to build your bottom line.”

Price:$17,949.00 Special Price:$14,999.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Cub Cadet Commercial - M54-KH TANK 54" 27HP Kohler]]> http://www.robinsonoutdoors.net/m54-kh-tank-54-25hp-kohler.html Engine 27.0 HP Kohler ® Command®, V-Twin OHV Engine Orientation Vertical Engine Displacement 725 cc Engine Fuel Gasoline Ignition Transistor controlled Lubrication / Filter Full pressure w/ spin-on filter Cooling System Air Air Cleaner Remote - replaceable dual element Alternator 12V-15 amp. regulated Wiring Automotive style Fuel Capacity Twin 7-gallon tanks Drive System Dual Hydro-Gear™ BDP-12 pumps & White® wheel motors Ground Speed 12 fwd / 5 rev Hydraulic Fluid Rimula 15W40 Hydro Fluid Capacity 3 qt. Hydraulic Oil Filter Standard Controls 3-way adjustable lap bars Lap Bar Dampers Standard Return To Neutral Standard Braking / Parking Brake Dynamic / Knott drum Caster Wheel Pivot Bearings Timken® roller, greasable Front Axle Pivoting / fixed with lockout pins Frame Fully welded steel 2" square tubing Front Tire Size 13" x 6.5"-6" (smooth) Rear Tire Size 24" x 12"-12" (turf) Length 78" Width with Chute Down 65" Height 72" Wheel Base 48" Front Track Width 39" Rear Track Width 51" Weight (approx.) 1100 lbs Safety Operator presence Deck Size 54" Select Cut System™ Deck Blades Triple Deck Construction 10-gauge fabricated with twin 7- & 10- gauge reinforcements Deck Style / System Floating Deck Drive Belt driven - Kevlar® Deck Wash Standard Deck Lift Foot pedal - spring assisted Deck Height Adjustment 1" - 5" (.25" increments) Blade Spindle Construction Cast aluminum Greasable Spindle Bearings Precision tapered rollers Blade Length 19" Blade Brake Clutch Ogura GT 2.5 Front Anti-Scalp Wheels 4 standard, greasable Rear Anti-Scalp Wheels N/A Rear Anti-Scalp Rollers / Striper Full width - adjustable Deck PTO Electronic - fingertip engagment ROPS Standard Monitor / Hour Meter Standard Seat / Adjustment High-back - foldable Seat Suspension Standard Arm Rests Standard Cup Holder Standard Storage Pouch Standard Rear Hitch Standard Front / Mid Footboard Traction Extruded steel Warranty** 3-year limited commercial Note * as rated by engine manufacturer Note ** see your local Independent Dealer for warranty information

Price:$9,549.00 Special Price:$7,599.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Cub Cadet Commercial - M48-KW TANK 48" 23HP Kawasaki]]> http://www.robinsonoutdoors.net/m48-kw-tank-48-23hp-kawasaki.html Engine 23.0 HP* Kawasaki®, V-Twin OHV Engine Orientation Vertical Engine Displacement 675 cc Engine Fuel Gasoline Ignition Transistor controlled Lubrication / Filter Full pressure w/ spin-on filter Cooling System Air Air Cleaner Remote - replaceable dual element Alternator 12V-15 amp. regulated Wiring Automotive style Fuel Capacity Twin 7-gallon Drive System Dual Hydro-Gear™ BDP-12 pumps & White® wheel motors Ground Speed 12 fwd / 5 rev Hydraulic Fluid Rimula 15W40 Hydro Fluid Capacity 3 qt. Hydraulic Oil Filter Standard Controls 3-way adjustable lap bars Lap Bar Dampers Standard Return To Neutral Standard Braking / Parking Brake Dynamic / Knott drum Caster Wheel Pivot Bearings Timken® roller, greasable Front Axle Pivoting / fixed with lockout pins Frame Fully welded steel 2" square tubing Front Tire Size 13" x 6.5"-6" (smooth) Rear Tire Size 23" x 9.50"-12" (turf) Length 74.5" Width with Chute Down 59" Height 72" Wheel Base 44.5" Front Track Width 40.25" Rear Track Width 47" Weight (approx.) 1080 lbs Safety Operator presence Deck Size 48" Select Cut System™ Deck Blades Triple Deck Construction 10-gauge fabricated with twin 7- & 10- gauge reinforcements Deck Style / System Floating Deck Drive Belt driven - Kevlar® Deck Wash Standard Deck Lift Foot pedal - spring assisted Deck Height Adjustment 1" - 5" (.25" increments) Blade Spindle Construction Cast aluminum Greasable Spindle Bearings Precision tapered rollers Blade Length 17" Blade Brake Clutch Ogura GT 2.5 Front Anti-Scalp Wheels 4 standard, greasable Rear Anti-Scalp Wheels N/A Rear Anti-Scalp Rollers / Striper Full width - adjustable Deck PTO Electronic - fingertip engagment ROPS Standard Monitor / Hour Meter Standard Seat / Adjustment High-back - foldable Seat Suspension Standard Arm Rests Standard Cup Holder Standard Storage Pouch Standard Rear Hitch Standard Front / Mid Footboard Traction Extruded steel Warranty** 3-year limited commercial

Price:$8,849.00 Special Price:$7,199.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Toro TimeCutter® Homeowner (42") 21-HP Zero Turning Lawn Mower]]> http://www.robinsonoutdoors.net/zeroturn-mowers/toro-z4220.html Model Model Number: Z4220 Manufacturer: Toro Engine Engine Brand: Kohler Courage Starting System: 12-Volt Key Start HP/CC: 21 HP/597 cc Fuel Tank Size: 3 Gallons Cycles: 4-Cycle Cylinders: 1 Cylinder Oil Filter: Yes Consumer Warranty: 3 Years Drive System: Hydrostatic Speeds: Variable Drive Wheels: Rear Wheels Maximum Speed: 7.0 Mph Maximum Reverse Speed: 3.4 Mph Transmission Type: Hydrostatic Wheels Front Tire Size: 11 x 4 Rear Tire Size: 18 x 7.5 Tire Type: Pneumatic Wheels Deck Cutting Options: 3-in-1 (Side-Discharge/Bag/Mulch) Material: Steel Construction: Stamped Blades: 2 Blades Cutting Height: 1.5-4.5 Inches Deck Lift System: Manual Hand Operated Engagement: PTO Electric Deck Drive: Belt Accessories Seat Type: Extra Tall Back Rear Bagger: Sold Separately Mulcher Kit: Sold Separately Headlights: No Hour Meter: Sold Separately Overview Weight: 600 Lbs. (272.16 kilograms) Dimensions: 78L x 54W x 38H (198.12 x 137.16 x 96.52 cm) Consumer Warranty: 3 Years

Price:$2,999.00 Special Price:$2,499.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag V-Ride 36" Deck, 20hp Kawasaki - Stand On ZTR]]> http://www.robinsonoutdoors.net/svr36a-20fx.html • Available in three models to fit a wide range of professional lawn maintenance needs. Compact size allows more units to fit on a single trailer. • Up to 8.5 MPH forward speeds (on 48" & 52" models) and 6 MPH reverse speeds keep productivity at a maximum. Up to 7.7 mph on 36" model. • 36" Advantage or 48" or 52" Velocity Plus™ cutter decks deliver an immaculate quality-of-cut. Three year limited warranty on the cutter decks. • Spacious operator platform with coil suspension delivers a smooth the ride and reduces operator fatigue. Springs are with 3.5" long and provide 1.25" of suspension travel. • Operator platform is made from heavy gauge steel with extruded star pattern for no-slip footing. The rear portion of the platform is hinged and can be flipped forward to reduce overall machine length on the trailer. Platform is wide and unobstructed. • Kawasaki FX series engines are commercial-grade and feature canister air filters, solenoid shift electric starters and twin barrel carburetors. • Auxiliary hydraulic oil cooler (on the 48" & 52" V-Ride) keeps oil temperatures well within a safe operating level and adds to hydraulic system component life. • Scag tough main frame construction delivers solid strength and ensures years of trouble-free service. The main frame was designed for strength and longevity. • Ogura GT 2.5 PTO clutch brake engages and stops the cutter blades smoothly and safely. Adjustable airgap ensures long component life. • Convenient, full-featured instrument panel has ignition key, PTO switch, Drive & Neutral lever, throttle, choke, and digital hour meter. The fuel gauge is located on top of the fuel tank, right next to the instrument panel for easy viewing. • Drive & Neutral lever - When in Neutral, the steering control levers are locked, preventing accidental movement by bumping the controls. In the Drive position, the steering controls have full, complete range for mower operation. • Operator Comfort Cushion can be mounted in 12 different positions, fitting a very wide range of operators and riding preferences. • Large diameter, padded steering control levers are very comfortable and easy on your hands. The hand force required to control the V-Ride is minimal and the lever action is extremely smooth. • Heavy-duty blade drive spindles provide reliable performance season after season. The Scag spindle is more than tough enough to handle the high horsepower and torque requirements of this mower. Three year limited warranty on the spindles. • Dual 10cc hydraulic pumps and dual 12ci cast iron high-torque wheel motors provide smooth, positive and reliable power to the drive wheels. Pressure relief valves in the pumps protect the system from internal pressure spikes and add to pump life. • 5.5 gallon fuel tank keeps you in the field cutting grass. Fuel tank features a fuel level gauge and an extra large, angled filler neck for easy filling. • Interlocked parking brake prevents the mower from being driven with the brake on, stopping premature brake wear. • Auxiliary canister air filter system is standard equipment on all V-Ride mowers. This provides increased service intervals and longer engine life. • Easily adjust cutting heights with the convenient, easy to lift hand lever. Wide range of adjustment from 1-1/2" to 4-1/2" in 1/4" increments. Auto-lock in transport positon with a simple thumb release. • Deck leveling adjustment brackets at all four corners of the deck allows for easy in-the-field deck leveling and pitch adjustment. • Tri-Plate cutter deck top is incredibly strong. .485" deck top thickness from three separate layers of steel (7ga., 10ga, and 11ga.) • "Split-Steel" pulleys are used on load carrying areas like the cutter deck spindles and pump drive systems. Split steel pulleys are stronger than cast iron or stamped pulley designs. Our pulleys are strong for long life and lightweight for reduced inertia and decreased wear on the cutter deck drive system. • Tapered locking hubs are used on spindle shafts and pump input shafts for easy pulley removal and service for years to come. • No plastic pulleys - Some [other brands] actually use plastic pulleys on their mowers. Not Scag. All Scag pulleys are made from metal. Plastic is for toys. • High-quality bearings and bearing debris guards on idler pulleys ensure long, reliable service. • Self-adjusting belt systems effortlessly keep belts in constant adjustment for maximum life and minimum maintenance. • Tapered roller bearings are utilized in the front caster wheel axles and caster yoke pivots for durability and reduced maintenance. • Extra-large 20x10.5-8 inch drive tires ensure better traction, less turf tearing and easy curb climbing (36"models have 18x7.0-8 drive tires). Drive tires are 4-ply for added durability. • 11x4-5 Flat-Free front caster tires are standard equipment and eliminate the downtime associated with flat tires caused by debris, thorns, etc. • Four tie-down points are built-in on the front and rear of the mower (2 front, 2 rear) for fast and convenient loading and unloading on trailers. • Front weight system (under the front belt cover) can be customized with fewer or additional weights. 36" V-Ride comes standard with two (2) 35lb. weights. 48" & 52" V-Ride come standard with one (1) 35lb. weight. Up to three (3) weights total can be installed at one time. • Custom-Cut Baffle allows you to customize the cutter deck to your individual cutting conditions. • Simple, easy to service, neutral and tracking linkages. It's the same design that we use on other Scag riding mowers. No cable systems or complicated bracketing. Straightforward designs with proven reliability. • User-friendly mower design allows access to the engine and filters, for easy maintenance. Engine oil drain hose included. • Solid hillside stability due to a low center-of-gravity, large tires and a wide stance. • The Scag "Simply the Best" commercial warranty stands behind you and your mower for years of profitable service. • Marbain cutter blades stay sharp longer for reduced maintenance. • High quality electrical components such as switches, wiring and harness looms are used throughout the Scag mower line for dependable service. • Digital SmartSense hour meter displays maintenance reminders to help ensure that routine service is completed. • Laser cut, vented rear panel allows for increased air flow and cooling for the hydraulic pump drive system. Blow out debris with compressed air or a blower without having to remove the panel. • Sealed fuse holder keeps the elements out to help prevent corrosion and electrical issues. • Fuel tank shut-off is located on top of the tank, near the instrument panel for easy access.

Price:$6,999.99 Special Price:$6,699.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag V-Ride 48" Deck, 24hp Kawasaki - Stand On ZTR]]> http://www.robinsonoutdoors.net/svr48v-24fx.html • Available in three models to fit a wide range of professional lawn maintenance needs. Compact size allows more units to fit on a single trailer. • Up to 8.5 MPH forward speeds (on 48" & 52" models) and 6 MPH reverse speeds keep productivity at a maximum. Up to 7.7 mph on 36" model. • 36" Advantage or 48" or 52" Velocity Plus™ cutter decks deliver an immaculate quality-of-cut. Three year limited warranty on the cutter decks. • Spacious operator platform with coil suspension delivers a smooth the ride and reduces operator fatigue. Springs are with 3.5" long and provide 1.25" of suspension travel. • Operator platform is made from heavy gauge steel with extruded star pattern for no-slip footing. The rear portion of the platform is hinged and can be flipped forward to reduce overall machine length on the trailer. Platform is wide and unobstructed. • Kawasaki FX series engines are commercial-grade and feature canister air filters, solenoid shift electric starters and twin barrel carburetors. • Auxiliary hydraulic oil cooler (on the 48" & 52" V-Ride) keeps oil temperatures well within a safe operating level and adds to hydraulic system component life. • Scag tough main frame construction delivers solid strength and ensures years of trouble-free service. The main frame was designed for strength and longevity. • Ogura GT 2.5 PTO clutch brake engages and stops the cutter blades smoothly and safely. Adjustable airgap ensures long component life. • Convenient, full-featured instrument panel has ignition key, PTO switch, Drive & Neutral lever, throttle, choke, and digital hour meter. The fuel gauge is located on top of the fuel tank, right next to the instrument panel for easy viewing. • Drive & Neutral lever - When in Neutral, the steering control levers are locked, preventing accidental movement by bumping the controls. In the Drive position, the steering controls have full, complete range for mower operation. • Operator Comfort Cushion can be mounted in 12 different positions, fitting a very wide range of operators and riding preferences. • Large diameter, padded steering control levers are very comfortable and easy on your hands. The hand force required to control the V-Ride is minimal and the lever action is extremely smooth. • Heavy-duty blade drive spindles provide reliable performance season after season. The Scag spindle is more than tough enough to handle the high horsepower and torque requirements of this mower. Three year limited warranty on the spindles. • Dual 10cc hydraulic pumps and dual 12ci cast iron high-torque wheel motors provide smooth, positive and reliable power to the drive wheels. Pressure relief valves in the pumps protect the system from internal pressure spikes and add to pump life. • 5.5 gallon fuel tank keeps you in the field cutting grass. Fuel tank features a fuel level gauge and an extra large, angled filler neck for easy filling. • Interlocked parking brake prevents the mower from being driven with the brake on, stopping premature brake wear. • Auxiliary canister air filter system is standard equipment on all V-Ride mowers. This provides increased service intervals and longer engine life. • Easily adjust cutting heights with the convenient, easy to lift hand lever. Wide range of adjustment from 1-1/2" to 4-1/2" in 1/4" increments. Auto-lock in transport positon with a simple thumb release. • Deck leveling adjustment brackets at all four corners of the deck allows for easy in-the-field deck leveling and pitch adjustment. • Tri-Plate cutter deck top is incredibly strong. .485" deck top thickness from three separate layers of steel (7ga., 10ga, and 11ga.) • "Split-Steel" pulleys are used on load carrying areas like the cutter deck spindles and pump drive systems. Split steel pulleys are stronger than cast iron or stamped pulley designs. Our pulleys are strong for long life and lightweight for reduced inertia and decreased wear on the cutter deck drive system. • Tapered locking hubs are used on spindle shafts and pump input shafts for easy pulley removal and service for years to come. • No plastic pulleys - Some [other brands] actually use plastic pulleys on their mowers. Not Scag. All Scag pulleys are made from metal. Plastic is for toys. • High-quality bearings and bearing debris guards on idler pulleys ensure long, reliable service. • Self-adjusting belt systems effortlessly keep belts in constant adjustment for maximum life and minimum maintenance. • Tapered roller bearings are utilized in the front caster wheel axles and caster yoke pivots for durability and reduced maintenance. • Extra-large 20x10.5-8 inch drive tires ensure better traction, less turf tearing and easy curb climbing (36"models have 18x7.0-8 drive tires). Drive tires are 4-ply for added durability. • 11x4-5 Flat-Free front caster tires are standard equipment and eliminate the downtime associated with flat tires caused by debris, thorns, etc. • Four tie-down points are built-in on the front and rear of the mower (2 front, 2 rear) for fast and convenient loading and unloading on trailers. • Front weight system (under the front belt cover) can be customized with fewer or additional weights. 36" V-Ride comes standard with two (2) 35lb. weights. 48" & 52" V-Ride come standard with one (1) 35lb. weight. Up to three (3) weights total can be installed at one time. • Custom-Cut Baffle allows you to customize the cutter deck to your individual cutting conditions. • Simple, easy to service, neutral and tracking linkages. It's the same design that we use on other Scag riding mowers. No cable systems or complicated bracketing. Straightforward designs with proven reliability. • User-friendly mower design allows access to the engine and filters, for easy maintenance. Engine oil drain hose included. • Solid hillside stability due to a low center-of-gravity, large tires and a wide stance. • The Scag "Simply the Best" commercial warranty stands behind you and your mower for years of profitable service. • Marbain cutter blades stay sharp longer for reduced maintenance. • High quality electrical components such as switches, wiring and harness looms are used throughout the Scag mower line for dependable service. • Digital SmartSense hour meter displays maintenance reminders to help ensure that routine service is completed. • Laser cut, vented rear panel allows for increased air flow and cooling for the hydraulic pump drive system. Blow out debris with compressed air or a blower without having to remove the panel. • Sealed fuse holder keeps the elements out to help prevent corrosion and electrical issues. • Fuel tank shut-off is located on top of the tank, near the instrument panel for easy access.

Price:$7,899.99 Special Price:$7,499.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag V-Ride 52" Deck, 26hp Kawasaki - Stand On ZTR]]> http://www.robinsonoutdoors.net/svr52v-26fx.html • Available in three models to fit a wide range of professional lawn maintenance needs. Compact size allows more units to fit on a single trailer. • Up to 8.5 MPH forward speeds (on 48" & 52" models) and 6 MPH reverse speeds keep productivity at a maximum. Up to 7.7 mph on 36" model. • 36" Advantage or 48" or 52" Velocity Plus™ cutter decks deliver an immaculate quality-of-cut. Three year limited warranty on the cutter decks. • Spacious operator platform with coil suspension delivers a smooth the ride and reduces operator fatigue. Springs are with 3.5" long and provide 1.25" of suspension travel. • Operator platform is made from heavy gauge steel with extruded star pattern for no-slip footing. The rear portion of the platform is hinged and can be flipped forward to reduce overall machine length on the trailer. Platform is wide and unobstructed. • Kawasaki FX series engines are commercial-grade and feature canister air filters, solenoid shift electric starters and twin barrel carburetors. • Auxiliary hydraulic oil cooler (on the 48" & 52" V-Ride) keeps oil temperatures well within a safe operating level and adds to hydraulic system component life. • Scag tough main frame construction delivers solid strength and ensures years of trouble-free service. The main frame was designed for strength and longevity. • Ogura GT 2.5 PTO clutch brake engages and stops the cutter blades smoothly and safely. Adjustable airgap ensures long component life. • Convenient, full-featured instrument panel has ignition key, PTO switch, Drive & Neutral lever, throttle, choke, and digital hour meter. The fuel gauge is located on top of the fuel tank, right next to the instrument panel for easy viewing. • Drive & Neutral lever - When in Neutral, the steering control levers are locked, preventing accidental movement by bumping the controls. In the Drive position, the steering controls have full, complete range for mower operation. • Operator Comfort Cushion can be mounted in 12 different positions, fitting a very wide range of operators and riding preferences. • Large diameter, padded steering control levers are very comfortable and easy on your hands. The hand force required to control the V-Ride is minimal and the lever action is extremely smooth. • Heavy-duty blade drive spindles provide reliable performance season after season. The Scag spindle is more than tough enough to handle the high horsepower and torque requirements of this mower. Three year limited warranty on the spindles. • Dual 10cc hydraulic pumps and dual 12ci cast iron high-torque wheel motors provide smooth, positive and reliable power to the drive wheels. Pressure relief valves in the pumps protect the system from internal pressure spikes and add to pump life. • 5.5 gallon fuel tank keeps you in the field cutting grass. Fuel tank features a fuel level gauge and an extra large, angled filler neck for easy filling. • Interlocked parking brake prevents the mower from being driven with the brake on, stopping premature brake wear. • Auxiliary canister air filter system is standard equipment on all V-Ride mowers. This provides increased service intervals and longer engine life. • Easily adjust cutting heights with the convenient, easy to lift hand lever. Wide range of adjustment from 1-1/2" to 4-1/2" in 1/4" increments. Auto-lock in transport positon with a simple thumb release. • Deck leveling adjustment brackets at all four corners of the deck allows for easy in-the-field deck leveling and pitch adjustment. • Tri-Plate cutter deck top is incredibly strong. .485" deck top thickness from three separate layers of steel (7ga., 10ga, and 11ga.) • "Split-Steel" pulleys are used on load carrying areas like the cutter deck spindles and pump drive systems. Split steel pulleys are stronger than cast iron or stamped pulley designs. Our pulleys are strong for long life and lightweight for reduced inertia and decreased wear on the cutter deck drive system. • Tapered locking hubs are used on spindle shafts and pump input shafts for easy pulley removal and service for years to come. • No plastic pulleys - Some [other brands] actually use plastic pulleys on their mowers. Not Scag. All Scag pulleys are made from metal. Plastic is for toys. • High-quality bearings and bearing debris guards on idler pulleys ensure long, reliable service. • Self-adjusting belt systems effortlessly keep belts in constant adjustment for maximum life and minimum maintenance. • Tapered roller bearings are utilized in the front caster wheel axles and caster yoke pivots for durability and reduced maintenance. • Extra-large 20x10.5-8 inch drive tires ensure better traction, less turf tearing and easy curb climbing (36"models have 18x7.0-8 drive tires). Drive tires are 4-ply for added durability. • 11x4-5 Flat-Free front caster tires are standard equipment and eliminate the downtime associated with flat tires caused by debris, thorns, etc. • Four tie-down points are built-in on the front and rear of the mower (2 front, 2 rear) for fast and convenient loading and unloading on trailers. • Front weight system (under the front belt cover) can be customized with fewer or additional weights. 36" V-Ride comes standard with two (2) 35lb. weights. 48" & 52" V-Ride come standard with one (1) 35lb. weight. Up to three (3) weights total can be installed at one time. • Custom-Cut Baffle allows you to customize the cutter deck to your individual cutting conditions. • Simple, easy to service, neutral and tracking linkages. It's the same design that we use on other Scag riding mowers. No cable systems or complicated bracketing. Straightforward designs with proven reliability. • User-friendly mower design allows access to the engine and filters, for easy maintenance. Engine oil drain hose included. • Solid hillside stability due to a low center-of-gravity, large tires and a wide stance. • The Scag "Simply the Best" commercial warranty stands behind you and your mower for years of profitable service. • Marbain cutter blades stay sharp longer for reduced maintenance. • High quality electrical components such as switches, wiring and harness looms are used throughout the Scag mower line for dependable service. • Digital SmartSense hour meter displays maintenance reminders to help ensure that routine service is completed. • Laser cut, vented rear panel allows for increased air flow and cooling for the hydraulic pump drive system. Blow out debris with compressed air or a blower without having to remove the panel. • Sealed fuse holder keeps the elements out to help prevent corrosion and electrical issues. • Fuel tank shut-off is located on top of the tank, near the instrument panel for easy access.

Price:$7,999.99 Special Price:$7,699.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Tiger Cub 48" 26HP Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-stc48v-26bsi.html Scag Tiger Cub 48" 19HP Zero-Turn Lawn Mower Engine Options: 19hp Kawasaki, air-cooled, twin cylinder, vertical shaft 23hp Kohler, air-cooled, twin cylinder, vertical shaft 25hp Kohler, air-cooled, twin cylinder, vertical shaft* 26hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft* Fuel Capacity/Design: 8 gallons, dual fuel tanks with molded-in cupholder. Travel Control: Twin "Quick-Fit" steering controls with gas dampers for smooth, precise maneuverability. Adjustable to fit various operator sizes.* Ground Speed: 10mph forward, 4.5mph reverse Main Frame Construction: Steel tube frame, full-length, fully-welded Drive Tires: 23 x 9.5 -12, 4 ply (48" & 52" models) 24 x 12 - 12, 4 ply (61" models) Caster Tires: 13 x 5 - 6, 4 ply; Flat-Free, semi-pneumatic* (48" & 52" models) 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic* (61" models) Caster Wheel Bearings: Tapered roller bearings Front Caster Arm Design: Bolt-on for easy replacement if necessary Hydraulic Pumps: Dual Pumps; 10cc displacement, Hydro-Gear Hydraulic Oil Cooler: Not required - Large capacity cooling reservoir Hydraulic Oil Filter: 10 micron Hydraulic Wheel Motors: Dual Hydro-Gear/Danfoss 15ci heavy-duty motors with extra large shafts Electrical System: 12 Volt battery, 300 cca. Solenoid shift starter. Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening Drive/Load Pulleys: Split-steel design -- stronger and lighter weight than cast-iron Instrument Panel : Key switch, throttle, manual choke, BBC switch Seat: Adjustable, fully cushioned seat with padded arm rests & retractable seat belt. PTO - Electric Clutch: Ogura GT3.5 - 250 ft lb / adjustable air-gap Cutter Decks: 48", 52", & 61" Velocity Plus Decks. Floating, adjustable, anti-scalping design. Cutter Deck Construction: Tri-Plate, welded with 7 gauge deck shell, 10 gauge & 11 gauge reinforcement plates. Cutter Deck Drive: Belt driven -- Straight belt for long life, not a twisted "mule" drive Number of Anti-Scalp Wheels: 48": 4 wheels in 4 positions 52": 4 wheels in 4 positions 61": 7 wheels in 5 positions Cutter Deck Spindles: Scag Heavy-Duty Spindles w/cast-iron housing & tapered roller bearings, backed by 3-year limited warranty Cutter Deck Height Adjustment: Foot pedal lift with self-locking mechanism at transport position Cutting Range: 1-1/4" to 5-1/2" in 1/4" increments Number of Cutter Blades: 3 Marbain blades Total Length: 48" & 52" models: 80" 61" models: 83" Total Width (with discharge chute in mowing position): 48" models: 60.5" 52" models: 64.5" 61" models: 73.5" Total Width (with discharge chute in transport position): 48" models: 49" 52" models: 53" 61" models: 62" Height (with ROPS): 66" Height (with ROPS folded*): 54" Weight (with ROPS): 48" models: 1030-1050 lbs. 52" models: 1100 lbs. 61" models: 1150 lbs. Warranty: 2 Yr. Mower Warranty--Parts & labor. 3 Yr. Deck Warranty--First & second years parts & labor; third year parts. 3 Yr. Spindle Warranty--First & second years parts & labor; third year parts. 2 Yr. Engine Warranty--Minimum two-year warranty covered directly through the individual engine manufacturer.

Price:$7,399.99 Special Price:$6,799.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Tiger Cat 61" 25HP Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-stc61v-25cvfr.html Scag Tiger Cat 61" 25HP Zero-Turn Lawn Mower Engine Options: 19hp Kawasaki, air-cooled, twin cylinder, vertical shaft 23hp Kohler, air-cooled, twin cylinder, vertical shaft 25hp Kohler, air-cooled, twin cylinder, vertical shaft* 26hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft* Fuel Capacity/Design: 8 gallons, dual fuel tanks with molded-in cupholder. Travel Control: Twin "Quick-Fit" steering controls with gas dampers for smooth, precise maneuverability. Adjustable to fit various operator sizes.* Ground Speed: 10mph forward, 4.5mph reverse Main Frame Construction: Steel tube frame, full-length, fully-welded Drive Tires: 23 x 9.5 -12, 4 ply (48" & 52" models) 24 x 12 - 12, 4 ply (61" models) Caster Tires: 13 x 5 - 6, 4 ply; Flat-Free, semi-pneumatic* (48" & 52" models) 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic* (61" models) Caster Wheel Bearings: Tapered roller bearings Front Caster Arm Design: Bolt-on for easy replacement if necessary Hydraulic Pumps: Dual Pumps; 10cc displacement, Hydro-Gear Hydraulic Oil Cooler: Not required - Large capacity cooling reservoir Hydraulic Oil Filter: 10 micron Hydraulic Wheel Motors: Dual Hydro-Gear/Danfoss 15ci heavy-duty motors with extra large shafts Electrical System: 12 Volt battery, 300 cca. Solenoid shift starter. Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening Drive/Load Pulleys: Split-steel design -- stronger and lighter weight than cast-iron Instrument Panel : Key switch, throttle, manual choke, BBC switch Seat: Adjustable, fully cushioned seat with padded arm rests & retractable seat belt. PTO - Electric Clutch: Ogura GT3.5 - 250 ft lb / adjustable air-gap Cutter Decks: 48", 52", & 61" Velocity Plus Decks. Floating, adjustable, anti-scalping design. Cutter Deck Construction: Tri-Plate, welded with 7 gauge deck shell, 10 gauge & 11 gauge reinforcement plates. Cutter Deck Drive: Belt driven -- Straight belt for long life, not a twisted "mule" drive Number of Anti-Scalp Wheels: 48": 4 wheels in 4 positions 52": 4 wheels in 4 positions 61": 7 wheels in 5 positions Cutter Deck Spindles: Scag Heavy-Duty Spindles w/cast-iron housing & tapered roller bearings, backed by 3-year limited warranty Cutter Deck Height Adjustment: Foot pedal lift with self-locking mechanism at transport position Cutting Range: 1-1/4" to 5-1/2" in 1/4" increments Number of Cutter Blades: 3 Marbain blades Total Length: 48" & 52" models: 80" 61" models: 83" Total Width (with discharge chute in mowing position): 48" models: 60.5" 52" models: 64.5" 61" models: 73.5" Total Width (with discharge chute in transport position): 48" models: 49" 52" models: 53" 61" models: 62" Height (with ROPS): 66" Height (with ROPS folded*): 54" Weight (with ROPS): 48" models: 1030-1050 lbs. 52" models: 1100 lbs. 61" models: 1150 lbs. Warranty: 2 Yr. Mower Warranty--Parts & labor. 3 Yr. Deck Warranty--First & second years parts & labor; third year parts. 3 Yr. Spindle Warranty--First & second years parts & labor; third year parts. 2 Yr. Engine Warranty--Minimum two-year warranty covered directly through the individual engine manufacturer.

Price:$8,699.99 Special Price:$8,099.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Tiger Cat 52" 25HP Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-stc52v-25cv.html Scag Tiger Cat 52" 25HP Zero-Turn Lawn Mower Engine Options: 19hp Kawasaki, air-cooled, twin cylinder, vertical shaft 23hp Kohler, air-cooled, twin cylinder, vertical shaft 25hp Kohler, air-cooled, twin cylinder, vertical shaft* 26hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft* Fuel Capacity/Design: 8 gallons, dual fuel tanks with molded-in cupholder. Travel Control: Twin "Quick-Fit" steering controls with gas dampers for smooth, precise maneuverability.Adjustabletofitvariousoperatorsizes.* Ground Speed: 10mph forward, 4.5mph reverse Main Frame Construction: Steel tube frame, full-length, fully-welded Drive Tires: 23 x 9.5 -12, 4 ply (48" & 52" models) 24 x 12 - 12, 4 ply (61" models) Caster Tires: 13 x 5 - 6, 4 ply; Flat-Free, semi-pneumatic* (48" & 52" models) 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic* (61" models) Caster Wheel Bearings: Tapered roller bearings Front Caster Arm Design: Bolt-on for easy replacement if necessary Hydraulic Pumps: Dual Pumps; 10cc displacement, Hydro-Gear Hydraulic Oil Cooler: Not required - Large capacity cooling reservoir Hydraulic Oil Filter: 10 micron Hydraulic Wheel Motors: Dual Hydro-Gear/Danfoss 15ci heavy-duty motors with extra large shafts Electrical System: 12 Volt battery, 300 cca. Solenoid shift starter. Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening Drive/Load Pulleys: Split-steel design -- stronger and lighter weight than cast-iron Instrument Panel : Key switch, throttle, manual choke, BBC switch Seat: Adjustable, fully cushioned seat with padded arm rests & retractable seat belt. PTO - Electric Clutch: Ogura GT3.5 - 250 ft lb / adjustable air-gap Cutter Decks: 48", 52", & 61" Velocity Plus Decks. Floating, adjustable, anti-scalping design. Cutter Deck Construction: Tri-Plate, welded with 7 gauge deck shell, 10 gauge & 11 gauge reinforcement plates. Cutter Deck Drive: Belt driven -- Straight belt for long life, not a twisted "mule" drive Number of Anti-Scalp Wheels: 48": 4 wheels in 4 positions 52": 4 wheels in 4 positions 61": 7 wheels in 5 positions Cutter Deck Spindles: Scag Heavy-Duty Spindles w/cast-iron housing & tapered roller bearings, backed by 3-year limited warranty Cutter Deck Height Adjustment: Foot pedal lift with self-locking mechanism at transport position Cutting Range: 1-1/4" to 5-1/2" in 1/4" increments Number of Cutter Blades: 3 Marbain blades Total Length: 48" & 52" models: 80" 61" models: 83" Total Width (with discharge chute in mowing position): 48" models: 60.5" 52" models: 64.5" 61" models: 73.5" Total Width (with discharge chute in transport position): 48" models: 49" 52" models: 53" 61" models: 62" Height (with ROPS): 66" Height (with ROPS folded*): 54" Weight (with ROPS): 48" models: 1030-1050 lbs. 52" models: 1100 lbs. 61" models: 1150 lbs. Warranty: 2 Yr. Mower Warranty--Parts & labor. 3 Yr. Deck Warranty--First & second years parts & labor; third year parts. 3 Yr. Spindle Warranty--First & second years parts & labor; third year parts. 2 Yr. Engine Warranty--Minimum two-year warranty covered directly through the individual engine manufacturer.

Price:$8,499.99 Special Price:$7,899.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Turf Tiger 72" 28HP CAT Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-stt72v-28cat-ss.html Scag Turf Tiger 72" 28HP Diesel Zero-Turn Lawn Mower Engine Options: -25hp Kubota diesel, 3-cylinder, liquid-cooled -28hp CAT diesel, 3-cylinder, liquid-cooled -27hp Kohler, air-cooled, twin cylinder, horizontal shaft -27hp Kawasaki, liquid-cooled, V-Twin, horizontal shaft -29hp Kawasaki, liquid-cooled, V-Twin, horizontal shaft, Digital Fuel Injection -31hp Kohler Aegis, liquid-cooled, V-Twin, horizontal shaft, Electronic Fuel Injection -35hp Briggs Vanguard Big Block, liquid-cooled, V-Twin Fuel Capacity/Design: 10 gallons, single fuel tank mounted low in the center of the mower to lower the center-of-gravity and improve hillside stability and traction. Travel Control: Twin “Quick-Fit” steering controls with gas dampers for smooth, precise maneuverability. Adjustable to fit various operator sizes. Ground Speed: 12mph forward, 5 mph reverse (29hp+ gas and Kubota diesel models) 11mph forward, 5 mph reverse (CAT diesel model) 10mph forward, 5mph reverse (27hp models) Main Frame Construction: Double tube, steel frame, full-length, fully-welded Drive Tires:  52": 23 x 10.5 -12, 4 ply  61" & 72": 24 x 12 - 12, 4 ply Caster Tires:  52": 13 x 5 - 6, 4 ply; Flat-Free  61" & 72": 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic Caster Wheel Bearings: Tapered roller bearings Front Caster Arm Design: Bolt-on for easy replacement if necessary Hydraulic Pumps: Dual Pumps; 16cc displacement, Hydro-Gear Hydraulic Oil Cooler: Yes - 4 qt system capacity with auxiliary oil cooler Hydraulic Oil Filter: 10 micron Hydraulic Wheel Motors: Dual 15ci Ross (29hp+ and Kubota diesel models); Hydro-Gear/Danfoss (27hp models); 18ci Hydro-Gear (28hp CAT and 31hp Kohler Aegis models) Electrical System: 12 Volt battery, 300 cca. Alternator, 15-40 amp charging. Solenoid shift starter.

Price:$18,898.99 Special Price:$16,699.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Turf Tiger 61" 35HP Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-stt61v-35bvac-ss.html Scag Turf Tiger 61" 35HP Zero-Turn Lawn Mower Engine Options: - 25hp Kubota diesel, 3-cylinder, liquid-cooled - 28hp CAT diesel, 3-cylinder, liquid-cooled - 27hp Kohler, air-cooled, twin cylinder, horizontal shaft - 27hp Kawasaki, liquid-cooled, V-Twin, horizontal shaft - 29hp Kawasaki, liquid-cooled, V-Twin, horizontal shaft, Digital Fuel Injection - 31hp Kohler Aegis, liquid-cooled, V-Twin, horizontal shaft, Electronic Fuel Injection - 35hp Briggs Vanguard Big Block, liquid-cooled, V-Twin Fuel Capacity/Design: 10 gallons, single fuel tank mounted low in the center of the mower to lower the center-of-gravity and improve hillside stability and traction. Travel Control: Twin “Quick-Fit” steering controls with gas dampers for smooth, precise maneuverability. Adjustable to fit various operator sizes. Ground Speed: - 12mph forward, 5 mph reverse (29hp+ gas and Kubota diesel models) - 11mph forward, 5 mph reverse (CAT diesel model) - 10mph forward, 5mph reverse (27hp models) Main Frame Construction: Double tube, steel frame, full-length, fully-welded Drive Tires: - 52": 23 x 10.5 -12, 4 ply - 61" & 72": 24 x 12 - 12, 4 ply Caster Tires: - 52": 13 x 5 - 6, 4 ply; Flat-Free - 61" & 72": 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic Caster Wheel Bearings: Tapered roller bearings Front Caster Arm Design: Bolt-on for easy replacement if necessary Hydraulic Pumps: Dual Pumps; 16cc displacement, Hydro-Gear Hydraulic Oil Cooler: Yes - 4 qt system capacity with auxiliary oil cooler Hydraulic Oil Filter: 10 micron Hydraulic Wheel Motors: Dual 15ci Ross (29hp+ and Kubota diesel models); Hydro-Gear/Danfoss (27hp models); 18ci Hydro-Gear (28hp CAT and 31hp Kohler Aegis models) Electrical System: 12 Volt battery, 300 cca. Alternator, 15-40 amp charging. Solenoid shift starter.

Price:$11,899.99 Special Price:$10,299.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Freedom Z 36" 17HP Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-freedom-z-36-17hp-kawasaki.html Engine Options: • 17hp Kawasaki, air-cooled, twin cylinder, vertical shaft • 19hp Kawasaki, air-cooled, twin cylinder, vertical shaft • 20hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft • 26hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft Fuel Capacity/Design: • 6.5 gallon (36”) fuel tank with molded-in cupholder & storage tray • 7 gallon (48” & 52”) fuel tank with molded-in cupholder & storage tray Travel Control: Twin padded steering controls with gas dampers for smooth, precise maneuverability. Levers are adjustable. Ground Speed: 8mph forward, 5mph reverse Main Frame Construction: Steel tube frame, full-length, fully-welded Drive Tires: 18 x 7 - 8 (36”); 20 x 10 -8, 4 ply (48” & 52”) Caster Tires: 11 x 4.5 - 5, 4 ply Caster Pivot Bearings: Sealed ball bearings Drive System: Dual Hydro-Gear ZT-2800 integrated transaxles with charge pumps and spin- on oil filters; steel plate oil filter guards protect filters from damage Mower Maintenance: “Maintenance Free” mower design has no grease points, saving you maintenance time Electrical System: 12 Volt battery. Bendix starter. Engine Guard: Super-tough rear engine guard protects the engine compartment from potential impact damage when backing up Specifications Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening. Drive/Load Pulleys: Steel pulleys. Steel dust and debris covers over idler pulley bearings to keep foreign material out and extend bearing life. Instrument Panel : Key switch, throttle, manual choke, BBC switch, digital “SmartSense” hourmeter within easy view Seat: Adjustable, fully cushioned seat with padded arm rests; retractable seat belt Foot Plate: Extra-large foot plate for improved comfort; easy to get on and off of mower. Pierced, extruded steel tread ensures solid footing. Rubber iso-mounted for additional operator comfort. PTO - Electric Clutch: Ogura, 87 ft/lb of torque / adjustable air-gap for long component life Cutter Decks: 36”, 48” & 52” decks. Floating, adjustable, anti-scalping design Cutter Deck Construction: Welded steel with 7-gauge deck skirt, 10-gauge top with 11-gauge reinforcement plate/baffles Cutter Deck Drive: Belt driven -- Straight belt for long life, not a twisted “mule” drive Anti-Scalp: One roller on left-front edge, two rollers on center-front edge, skid plate at rear-center of deck Cutter Deck Spindles: Heavy-duty, no-maintenance spindles with cast aluminum housing & sealed ball bearings; reliable, worry-free performance day in and day out Cutter Deck Height Adjustment: Foot pedal/peg lift with self-locking mechanism at transport position. Large knurled foot pedal/peg for “no-slip” deck lifting. Cutting Range: 1” to 4-1/2” in 1/4” increments. Easily adjustable while seated. Number of Cutter Blades: 3 Marbain blades Deck Leveling: 4-corner cutter deck adjustment mechanisms allow for easy deck leveling and pitch adjustment to ensure a smooth, even cut Total Length: 73" Total Width (with discharge chute in mowing position): • 36" models: 48.5" • 48" models: 60.5" • 52" models: 64.5" Total Width (with discharge chute in transport position): • 36" models: 37" • 48" models: 49" • 52" models: 53" Height: 60” Weight: • 36" models: 690 lbs. • 48" models: 775 lbs. • 52" models: 785 lbs. Warranty: • 3 Yr. Residential Mower Warranty*—Parts & labor • 1 Yr. Commercial Mower Warranty*—Parts & labor • 2 Yr. Engine Warranty—Minimum two-year warranty covered directly through the individual engine manufacturer.

Price:$5,999.99 Special Price:$5,499.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Tiger Cub 48" 19HP Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-stc48v-19kai.html Scag Tiger Cub 48" 19HP Zero-Turn Lawn Mower Engine Options: 19hp Kawasaki, air-cooled, twin cylinder, vertical shaft 23hp Kohler, air-cooled, twin cylinder, vertical shaft 25hp Kohler, air-cooled, twin cylinder, vertical shaft* 26hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft* Fuel Capacity/Design: 8 gallons, dual fuel tanks with molded-in cupholder. Travel Control: Twin "Quick-Fit" steering controls with gas dampers for smooth, precise maneuverability. Adjustable to fit various operator sizes.* Ground Speed: 10mph forward, 4.5mph reverse Main Frame Construction: Steel tube frame, full-length, fully-welded Drive Tires: 23 x 9.5 -12, 4 ply (48" & 52" models) 24 x 12 - 12, 4 ply (61" models) Caster Tires: 13 x 5 - 6, 4 ply; Flat-Free, semi-pneumatic* (48" & 52" models) 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic* (61" models) Caster Wheel Bearings: Tapered roller bearings Front Caster Arm Design: Bolt-on for easy replacement if necessary Hydraulic Pumps: Dual Pumps; 10cc displacement, Hydro-Gear Hydraulic Oil Cooler: Not required - Large capacity cooling reservoir Hydraulic Oil Filter: 10 micron Hydraulic Wheel Motors: Dual Hydro-Gear/Danfoss 15ci heavy-duty motors with extra large shafts Electrical System: 12 Volt battery, 300 cca. Solenoid shift starter. Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening Drive/Load Pulleys: Split-steel design -- stronger and lighter weight than cast-iron Instrument Panel : Key switch, throttle, manual choke, BBC switch Seat: Adjustable, fully cushioned seat with padded arm rests & retractable seat belt. PTO - Electric Clutch: Ogura GT3.5 - 250 ft lb / adjustable air-gap Cutter Decks: 48", 52", & 61" Velocity Plus Decks. Floating, adjustable, anti-scalping design. Cutter Deck Construction: Tri-Plate, welded with 7 gauge deck shell, 10 gauge & 11 gauge reinforcement plates. Cutter Deck Drive: Belt driven -- Straight belt for long life, not a twisted "mule" drive Number of Anti-Scalp Wheels: 48": 4 wheels in 4 positions 52": 4 wheels in 4 positions 61": 7 wheels in 5 positions Cutter Deck Spindles: Scag Heavy-Duty Spindles w/cast-iron housing & tapered roller bearings, backed by 3-year limited warranty Cutter Deck Height Adjustment: Foot pedal lift with self-locking mechanism at transport position Cutting Range: 1-1/4" to 5-1/2" in 1/4" increments Number of Cutter Blades: 3 Marbain blades Total Length: 48" & 52" models: 80" 61" models: 83" Total Width (with discharge chute in mowing position): 48" models: 60.5" 52" models: 64.5" 61" models: 73.5" Total Width (with discharge chute in transport position): 48" models: 49" 52" models: 53" 61" models: 62" Height (with ROPS): 66" Height (with ROPS folded*): 54" Weight (with ROPS): 48" models: 1030-1050 lbs. 52" models: 1100 lbs. 61" models: 1150 lbs. Warranty: 2 Yr. Mower Warranty--Parts & labor. 3 Yr. Deck Warranty--First & second years parts & labor; third year parts. 3 Yr. Spindle Warranty--First & second years parts & labor; third year parts. 2 Yr. Engine Warranty--Minimum two-year warranty covered directly through the individual engine manufacturer.

Price:$8,299.99 Special Price:$7,099.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Husqvarna IZ4819 - 48" Cut Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/husqvarna-iz-48-19hp-kawasaki.html Husqvarna IZ4819 - 48" Cut Zero-Turn Lawn Mower Engine Engine manufacturer Kawasaki Engine name FH580V Engine type V-Twin Power 19 hp Air Filter type Heavy-Duty Canister Style Electrical System 12 V, 15 Amp Fuel tank volume 11.4 gal. Drive system Transmission type Pump/Wheel motor Hydro pumps Hydro-Gear 10cc Wheel motors, cubic inch Parker TE, 14 Steering Control Ergonomic, adjustable controls Blade engagement Electric Heavy-duty dampeners Speed forward, min-max 0-9.5 mph Speed reverse, min-max 0-5 mph Equipment Cutting width 48 inch Cutting height, min-max 1.5 - 5 inch Deck lifting system Quick Lift with foot assist Cutting deck type TunnelRam Blades 3 Blade length 21 inch Blade-tip speed 18200 fpm ROPS Seat type Full suspension, arm rests Cup holder Hour meter Digital Dimensions Tire dimensions, front 13 x 5-6 Tire dimensions, rear 23 x 8.5-12 Hydraulic reservoir 0 lit Weight 870 lbs Base machine, width (chute up) 49 inch Base machine, width (chute down) 62 inch Base machine, length 82 inch Base machine, height 55 inch Productivity Productivity 3.8 acres/hr Warranty Commercial Warranty 5 years

Price:$6,999.95 Special Price:$5,599.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Toro Z MASTER - Z400 48" Deck 21 HP Kawasaki]]> http://www.robinsonoutdoors.net/zeroturn-mowers/toro-74448-z400-48-deck-21-hp-kawasaki.html * 21 hp Engine: Kawasaki OHV V-Twin * Air Filter: Heavy-Duty Canister * Cutting Deck: 5 - 1/2 in. deep 7-gauge 48 in. cut with reinforcing deck guard * Spindle Housings: Cast iron with 9 - 3/8 in. base * Spindle Bearings: Ball bearings * Blades : 1/4 in. thick heat treated steel * Blade Tip Speed: 18,500+ ft. min. * Clutch: 175 ft. lbs. Electromagnetic * Height of Cut: 1 - 1/2 in. - 4 - 1/2 in. in 1/4 in. increments * Discharge Chute: High-performance 5/16 in. rubber * Carrier Frame: 2 in. x 2 in. x 3/16 in. tubular steel * Ground Speed: 8.5 mph forward 4.9 mph rev * Hydraulic Pumps: Hydro-Gear 10 cc * Hydraulic Wheel Motors: Hydro-Gear 15.1 cir 1 - 1/4 in. tapered shaft * Hydraulic Fluid: Premium synthetic * Drive Tires: 23 in. x 9.5 in.- 12 in. 4-ply * Caster Tires: 13 in. x 5 in.-6 in. 4-ply smooth pneumatic * Steering Controls: 1-5/8 in. dia. levers; adjustable * Fuel Capacity: 10 gal

Price:$7,777.00 Special Price:$6,999.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Wright Stander, 52" 23 HP Kawasaki]]> http://www.robinsonoutdoors.net/ws5223kawe.html - Rugged and durable with deck sizes of 32", 36", 42", 48", 52", and 61" - Driven from a standing position so you can shift your weight instantly to handle changing terrain - Mows faster than a traditional walk-behind mower with less user fatigue - The smaller sizeﾠallows you toﾠfit more mowers on a trailer - With no seat, seat belts, or arm rests, you can easily step off for a quick exit or to move debris - Outstanding control and handling for trim mowing Wright provides a 2-year Limited Warranty on mowers which covers parts and labor. See your local Wright dealer for further details.

Price:$7,884.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Toro 74569 GrandStand Stand-on Mower, 23HP 52"]]> http://www.robinsonoutdoors.net/zeroturn-mowers/toro-74569-grandstand-23-hp-52.html 23 hp Engine: Kawasaki Cooling System: Air-Cooled Air Filter: Dual element Cutting Deck: 7-gauge 52 in. TURBO FORCE with bull-nose bumper Spindle Housing: Cast iron Spindle Bearings: Greasable ball bearings Blades: 1/4 in. thick heat-treated steel Blade Tip Speed: 18,500+ ft. min. Height of Cut: 1 in. - 5 in. in 1/4 in. increments Discharge Chute: High-performance rubber Carrier Frame: 3 in. x 1 - 1/2 in. tubular steel Ground Speed: 8.0 mph forward Hydraulic Drive System: Pumps and wheel motors Hydraulic Fluid: Premium synthetic Drive Tires: 20 in. x 10 in.- 8 in. Caster Tires: 11 in. x 4 in.- 5 in. flat-free semi-pneumatic Controls: Twin lever Fuel Capacity: Gasoline - 6.8 gallons

Price:$8,888.00 Special Price:$7,999.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Cub Cadet Commercial - RECON 60" 25HP Kohler]]> http://www.robinsonoutdoors.net/recon-60-25hp-kohler-command.html Professional grade Kohler® V-Twin OHV engine provides the strength for year after year of tough, reliable power and durability. 60" triple blade, fabricated deck Dual 5-gallon fuel tanks provide for longer running time and increased productivity Fully welded steel frame provides increased strength. White® wheel motors and Kanzaki DUP-10 pumps for smooth operation 3-way adjustable lap bars for individualized fit and comfort. Two anti-scalp wheels and rollers in the front and back give the turf a professional striping look. Engine 25.0 HP* Kohler® V-Twin OHV Engine Orientation Vertical Engine Displacement 724cc Engine Fuel Gasoline Ignition Transistor controlled Lubrication / Filter Full-pressure w/spin-on oil filter Cooling System Air Air Cleaner H/D standard Alternator 12V - 15 Amp regulated Wiring Automotive-style Fuel Capacity Twin 5-gallon tanks Drive System Kanzaki DUP-10 pump & White® wheel motors Ground Speed 10 fwd/ 5 rev Hydraulic Fluid Rimula - 15W40 Hydro Fluid Capacity 2.5 qt. Hydraulic Oil Filter Standard Controls 3-way adjustable lap bars Lap Bar Dampers Standard Return to Neutral Standard Braking / Parking Brake Dynamic / Knott drum Caster Wheel Pivot Bearings Sintered self-lubricating Front Axle Pivoting / fixed with lockout pins Frame Fully welded 2" square tube Front Tire Size 13" x 6"-6" (caster) Rear Tire Size 23" x 9.5"-12" Length 78" Width with Chute Down 71" Height 40.5" Wheel Base 48.5" Front Track Width 39" Rear Track Width 46.5" Weight (Approx.) 1035 lbs Safety Operator presence Deck Size 60" Deck Blades Triple Deck Construction Fabricated Deck Style / System Floating Deck Drive Belt driven - Kevlar® Deck Wash Patented SmartJet™ high-pressure deck washing system Deck Lift Foot - lever Deck Height Adjustment 1" - 5" (in .5" increments) Blade Spindle Construction Cast aluminum Greasable Spindle Bearings Precision tapered rollers Blade Length 21" Blade Brake Clutch Ogura GT 2 Anti-Scalp Wheels 2 standard, greasable Front Anti-Scalp Roller Standard Rear Anti-Scalp Rollers Full width - adjustable ROPS Standard Monitor / Hour Meter Standard Seat / Adjustment High back / lever Armrests Standard Seat Suspension Grammer - standard Cup Holder Standard Storage Pouch Optional Tow Hitch Standard Mulch Kit Optional Bagger Optional Warranty 2-year limited commercial** Note * as rated by engine manufacturer Note ** see your local Independent Dealer for warranty information

Price:$7,849.00 Special Price:$6,999.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Cub Cadet Commercial - RECON 48" 23HP Kohler]]> http://www.robinsonoutdoors.net/recon-48-23hp-kohler-command.html Professional grade Kohler® V-Twin OHV engine provides the strength for year after year of tough, reliable power and durability. 48" triple blade, fabricated deck Dual 5-gallon fuel tanks provide for longer running time and increased productivity Fully welded steel frame provides increased strength. White® wheel motors and Kanzaki DUP-10 pumps for smooth operation. 3-way adjustable lap bars for individualized fit and comfort. Two anti-scalp wheels and rollers in the front and back give the turf a professional striping look. Engine 23.0 HP* Kohler® V-Twin OHV Engine Orientation Vertical Engine Displacement 674cc Engine Fuel Gasoline Ignition Transistor controlled Lubrication / Filter Full-pressure w/spin-on oil filter Cooling System Air Air Cleaner H/S standard Alternator 12V - 15 Amp regulated Wiring Automotive-style Fuel Capacity Twin 5-gallon tanks Drive System Kanzaki DUP-10 pump & White® wheel motors Ground Speed 10 fwd/ 5 rev Hydraulic Fluid Rimula - 15W40 Hydro Fluid Capacity 2.5 qt. Hydraulic Oil Filter Standard Controls 3-way adjustable lap bars Lap Bar Dampers Standard Return to Neutral Standard Braking / Parking Brake Dynamic, Knott drum Caster Wheel Pivot Bearings Sintered self-lubricating Front Axle Pivoting / fixed with lockout pins Frame Fully welded 2" square tubing Front Tire Size 13" x 5"-6" (caster) Rear Tire Size 23" x 9.5" - 12" Length 74" Width with Chute Down 59" Height 40.5" Wheel Base 44.5" Front Track Width 40" Rear Track Width 46.5" Weight (Approx.) 995 lbs Safety Operator presence Deck Size 48" Deck Blades Triple Deck Construction Fabricated Deck Style / System Floating Deck Drive Belt driven - Kevlar® Deck Wash Patented SmartJet™ high-pressure deck washing system Deck Lift Foot - lever Deck Height Adjustment 1" - 5" (in .25 increments) Blade Spindle Construction Cast aluminum Greasable Spindle Bearings Precision tapered rollers Blade Length 17" Blade Brake Clutch Ogura GT 2 Anti-Scalp Wheels 2 standard, greasable Front Anti-Scalp Roller Standard Rear Anti-Scalp Rollers Full width - adjustable ROPS Standard Monitor / Hour Meter Standard Seat / Adjustment High back / lever Armrests Standard Seat Suspension Grammer - standard Cup Holder Standard Storage Pouch Optional Tow Hitch Standard Mulch Kit Optional Bagger Optional Warranty 2-year limited commercial** Note * as rated by engine manufacturer Note ** see your local Independent Dealer for warranty information

Price:$7,449.00 Special Price:$6,599.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Wright Stander 32" - 17 HP Kawasaki (kai)]]> http://www.robinsonoutdoors.net/ws3217kawre.html - Rugged and durable with deck sizes of 32", 36", 42", 48", 52", and 61" - Driven from a standing position so you can shift your weight instantly to handle changing terrain - Mows faster than a traditional walk-behind mower with less user fatigue - The smaller sizeﾠallows you toﾠfit more mowers on a trailer - With no seat, seat belts, or arm rests, you can easily step off for a quick exit or to move debris - Outstanding control and handling for trim mowing Wright provides a 2-year Limited Warranty on mowers which covers parts and labor. See your local Wright dealer for further details.

Price:$6,234.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Cub Cadet Commercial - M72-KW TANK 72" 37HP Kawasaki]]> http://www.robinsonoutdoors.net/m60-kw-tank-60-31hp-kawasaki-1.html Engine Available in 2 engine choices: 37.0 HP* Kawasaki®, V-Twin / 28.0 HP* Caterpillar® Liquid Cooled Diesel, 3-Cylinder Engine Orientation Vertical / horizontal Engine Displacement 999cc / 1131cc Engine Fuel Gasoline / diesel Ignition Transistor controlled Lubrication / Filter Full pressure w/ spin-on filter Cooling System Air / liquid Air Cleaner Remote - replaceable dual element Alternator 12V-15 amp. regulated Wiring Automotive style Fuel Capacity Twin 7-gallon tanks Drive System Dual Hydro-Gear™ BDP-12 pumps with White® wheel motors (gas models) or Parker® wheel motors (diesel model) Ground Speed 12 fwd / 5 rev Hydraulic Fluid Rimula 15W40 Hydro Fluid Capacity 3 qt. Hydraulic Oil Filter Standard Controls 3-way adjustable lap bars Lap Bar Dampers Standard Return To Neutral Standard Braking / Parking Brake Dynamic / Knott drum Caster Wheel Pivot Bearings Timken® roller, greasable Front Axle Pivoting / fixed with lockout pins Frame Fully welded steel 2" square tubing Front Tire Size 13" x 6.5"-6" (smooth) Rear Tire Size 24" x 12"-12" (turf) Length 81" Width with Chute Down 83" Height 72" Wheel Base 51" Front Track Width 44" Rear Track Width 57" Weight (approx.) 1380 lbs / 1520 lbs Safety Operator presence Deck Size 72" Select Cut System™ (gas models) or Command Cut System™ (diesel model) Deck Blades Triple Deck Construction 9-gauge fabricated with twin 7- & 10- gauge reinforcements Deck Style / System Floating Deck Drive Belt driven - Kevlar® Deck Wash Standard Deck Lift Foot pedal - spring assisted Deck Height Adjustment 1" - 5" (.25" increments)/ 1.5" - 5" (diesel model) Blade Spindle Construction Cast aluminum Greasable Spindle Bearings Precision tapered rollers Blade Length 25" Blade Brake Clutch Ogura GT 3.5 Front Anti-Scalp Wheels 4 standard, greasable Rear Anti-Scalp Wheels 2 Rear Anti-Scalp Rollers / Striper Full width - adjustable Deck PTO Electronic - fingertip engagment ROPS Standard Monitor / Hour Meter Standard Seat / Adjustment High-back - foldable Seat Suspension Standard Arm Rests Standard Cup Holder Standard Storage Pouch Standard Rear Hitch Standard Front / Mid Footboard Traction Extruded steel Warranty** 3-year limited commercial

Price:$11,749.00 Special Price:$9,999.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Cub Cadet Commercial - M60-KW TANK 60" 31HP Kawasaki]]> http://www.robinsonoutdoors.net/m60-kw-tank-60-31hp-kawasaki.html Engine Available in 4 engine choices: 30.0 HP* Kohler® Command®, V-Twin / 31.0 HP* Kawasaki®, V-Twin / 29.0 HP* Kawasaki®, Liquid Cooled, V-Twin / 28.0 HP* Caterpillar® Liquid Cooled Diesel, 3-Cylinder Engine Orientation Vertical / vertical / horizontal / horizontal Engine Displacement 747cc / 852cc / 745cc / 1131cc Engine Fuel Gasoline / gasoline / gasoline / diesel Ignition Transistor controlled Lubrication / Filter Full pressure w/ spin-on filter Cooling System Air / air / liquid / liquid Air Cleaner Remote - replaceable dual element Alternator 12V-15 amp. regulated Wiring Automotive style Fuel Capacity Twin 7-gallon tanks Drive System Dual Hydro-Gear™ BDP-12 pumps with White® wheel motors (gas models) or Parker® wheel motors (diesel model) Ground Speed 12 fwd / 5 rev Hydraulic Fluid Rimula 15W40 Hydro Fluid Capacity 3 qt. Hydraulic Oil Filter Standard Controls 3-way adjustable lap bars Lap Bar Dampers Standard Return To Neutral Standard Braking / Parking Brake Dynamic / Knott drum Caster Wheel Pivot Bearings Timken® roller, greasable Front Axle Pivoting / fixed with lockout pins Frame Fully welded steel 2" square tubing Front Tire Size 13" x 6.5"-6" (smooth) Rear Tire Size 24" x 12"-12" (turf) Length 78" Width with Chute Down 71" Height 72" Wheel Base 48" Front Track Width 39" Rear Track Width 57" Weight (approx.) 1150 lbs / 1150 lbs / 1220 lbs / 1450 lbs Safety Operator presence Deck Size 60" Select Cut System™ (gas models) or Command Cut System™ (diesel model) Deck Blades Triple Deck Construction 10-gauge fabricated with twin 7- & 10- gauge reinforcements Deck Style / System Floating Deck Drive Belt driven - Kevlar® Deck Wash Standard Deck Lift Foot pedal - spring assisted Deck Height Adjustment 1" - 5" (.25" increments)/ 1.5" - 5" (diesel model) Blade Spindle Construction Cast aluminum Greasable Spindle Bearings Precision tapered rollers Blade Length 21" Blade Brake Clutch Ogura GT 2.5 / 2.5 / 3.5 / 3.5 Front Anti-Scalp Wheels 4 standard, greasable Rear Anti-Scalp Wheels 2 Rear Anti-Scalp Rollers / Striper Full width - adjustable Deck PTO Electronic - fingertip engagment ROPS Standard Monitor / Hour Meter Standard Seat / Adjustment High-back - foldable Seat Suspension Standard Arm Rests Standard Cup Holder Standard Storage Pouch Standard Rear Hitch Standard Front / Mid Footboard Traction Extruded steel Warranty** 3-year limited commercial

Price:$10,149.00 Special Price:$8,599.00

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Freedom Z 48" 19HP Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-freedom-z-48-19hp-kawasaki.html Scag Freedom Z 48" Cut Zero-Turn Lawn Mower. Engine Options:  17hp Kawasaki, air-cooled, twin cylinder, vertical shaft  19hp Kawasaki, air-cooled, twin cylinder, vertical shaft  20hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft  26hp Briggs & Stratton ELS, air-cooled, twin cylinder, vertical shaft Fuel Capacity/Design:  6.5 gallon (36”) fuel tank with molded-in cupholder & storage tray  7 gallon (48” & 52”) fuel tank with molded-in cupholder & storage tray Travel Control: Twin padded steering controls with gas dampers for smooth, precise maneuverability. Levers are adjustable. Ground Speed: 8mph forward, 5mph reverse Main Frame Construction: Steel tube frame, full-length, fully-welded Drive Tires: 18 x 7 - 8 (36”); 20 x 10 -8, 4 ply (48” & 52”) Caster Tires: 11 x 4.5 - 5, 4 ply Caster Pivot Bearings: Sealed ball bearings Drive System: Dual Hydro-Gear ZT-2800 integrated transaxles with charge pumps and spin- on oil filters; steel plate oil filter guards protect filters from damage Mower Maintenance: “Maintenance Free” mower design has no grease points, saving you maintenance time Electrical System: 12 Volt battery. Bendix starter. Engine Guard: Super-tough rear engine guard protects the engine compartment from potential impact damage when backing up Specifications Belts: Kevlar cord. Self-adjusting, spring-loaded, self-tightening. Drive/Load Pulleys: Steel pulleys. Steel dust and debris covers over idler pulley bearings to keep foreign material out and extend bearing life. Instrument Panel : Key switch, throttle, manual choke, BBC switch, digital “SmartSense” hourmeter within easy view Seat: Adjustable, fully cushioned seat with padded arm rests; retractable seat belt Foot Plate: Extra-large foot plate for improved comfort; easy to get on and off of mower. Pierced, extruded steel tread ensures solid footing. Rubber iso-mounted for additional operator comfort. PTO - Electric Clutch: Ogura, 87 ft/lb of torque / adjustable air-gap for long component life Cutter Decks: 36”, 48” & 52” decks. Floating, adjustable, anti-scalping design Cutter Deck Construction: Welded steel with 7-gauge deck skirt, 10-gauge top with 11-gauge reinforcement plate/baffles Cutter Deck Drive: Belt driven -- Straight belt for long life, not a twisted “mule” drive Anti-Scalp: One roller on left-front edge, two rollers on center-front edge, skid plate at rear-center of deck Cutter Deck Spindles: Heavy-duty, no-maintenance spindles with cast aluminum housing & sealed ball bearings; reliable, worry-free performance day in and day out Cutter Deck Height Adjustment: Foot pedal/peg lift with self-locking mechanism at transport position. Large knurled foot pedal/peg for “no-slip” deck lifting. Cutting Range: 1” to 4-1/2” in 1/4” increments. Easily adjustable while seated. Number of Cutter Blades: 3 Marbain blades Deck Leveling: 4-corner cutter deck adjustment mechanisms allow for easy deck leveling and pitch adjustment to ensure a smooth, even cut Total Length: 73" Total Width (with discharge chute in mowing position):  36" models: 48.5"  48" models: 60.5"  52" models: 64.5" Total Width (with discharge chute in transport position):  36" models: 37"  48" models: 49"  52" models: 53" Height: 60” Weight:  36" models: 690 lbs.  48" models: 775 lbs.  52" models: 785 lbs. Warranty:  3 Yr. Residential Mower Warranty*—Parts & labor  1 Yr. Commercial Mower Warranty*—Parts & labor  2 Yr. Engine Warranty—Minimum two-year warranty covered directly through the individual engine manufacturer.

Price:$6,199.99 Special Price:$5,699.99

]]> Thu, 11 Mar 2010 23:52:22 +0000 <![CDATA[Scag Turf Tiger 61" 29HP DFI Zero-Turn Lawn Mower]]> http://www.robinsonoutdoors.net/scag-stt61v-29ka-dfi.html Scag Turf Tiger 61" 29HP DFI Zero-Turn Lawn Mower Engine Options:  25hp Kubota diesel, 3-cylinder, liquid-cooled  28hp CAT diesel, 3-cylinder, liquid-cooled  27hp Kohler, air-cooled, twin cylinder, horizontal shaft  27hp Kawasaki, liquid-cooled, V-Twin, horizontal shaft  29hp Kawasaki, liquid-cooled, V-Twin, horizontal shaft, Digital Fuel Injection  31hp Kohler Aegis, liquid-cooled, V-Twin, horizontal shaft, Electronic Fuel Injection  35hp Briggs Vanguard Big Block, liquid-cooled, V-Twin Fuel Capacity/Design: 10 gallons, single fuel tank mounted low in the center of the mower to lower the center-of-gravity and improve hillside stability and traction. Travel Control: Twin “Quick-Fit” steering controls with gas dampers for smooth, precise maneuverability. Adjustable to fit various operator sizes. Ground Speed:  12mph forward, 5 mph reverse (29hp+ gas and Kubota diesel models)  11mph forward, 5 mph reverse (CAT diesel model)  10mph forward, 5mph reverse (27hp models) Main Frame Construction: Double tube, steel frame, full-length, fully-welded Drive Tires:  52": 23 x 10.5 -12, 4 ply  61" & 72": 24 x 12 - 12, 4 ply Caster Tires:  52": 13 x 5 - 6, 4 ply; Flat-Free  61" & 72": 13 x 6.5 - 6, 4 ply; Flat-Free, semi-pneumatic Caster Wheel Bearings: Tapered roller bearings Front Caster Arm Design: Bolt-on for easy replacement if necessary Hydraulic Pumps: Dual Pumps; 16cc displacement, Hydro-Gear Hydraulic Oil Cooler: Yes - 4 qt system capacity with auxiliary oil cooler Hydraulic Oil Filter: 10 micron Hydraulic Wheel Motors: Dual 15ci Ross (29hp+ and Kubota diesel models); Hydro-Gear/Danfoss (27hp models); 18ci Hydro-Gear (28hp CAT and 31hp Kohler Aegis models) Electrical System: 12 Volt battery, 300 cca. Alternator, 15-40 amp charging. Solenoid shift starter.

Price:$13,799.99 Special Price:$13,099.99

]]> Thu, 11 Mar 2010 23:52:22 +0000